GoudieFX 808+
|
|
|
| Click Images for a larger view | ||
|---|---|---|
Description:
The GoudieFX 808+ is based on the classic ts808 design with the less/more mod applied and component upgrades across the board. The less/more mod yields less gain at minimum settings (great clean boost) and twice the gain at maximum drive settings. This is a great sound for many styles including alternative, jazz, blues, rock, hard rock and country, also sounds great pushing a cranked marshall or mesa for a lead boost. There is a toggle switch that allows you to select either symmetrical (toggle UP) or asymmetrical diode clipping (toggle DOWN). Asymmetrical mode adds an extra diode to one side which gives you more head room and less compression, very bluesy strat sounds. The 808+ is built using a new production JRC4558D, 1% metal film resistors and quality polyester film capacitors for a great tone with the least noise possible. This pedal comes in a dark forest green powdercoat finish with white silkscreening that shows very well on dimly lit stages. The LED is green, blue is also available if preferred.
The audio files below have a variety of drive and clipping modes to give you a better idea of how this pedal will sound in your setup.
Audio Samples:
- Heavy 1 - Drive Max, Tone 50%, Level 50%, Asymmetrical Clipping
- Heavy 2 - Drive Max, Tone 50%, Level 50%, Symmetrical Clipping
- Heavy 3 - Drive Max, Tone 50%, Level 50%, Asymmetrical Clipping
- Clean 1 - Drive Off, Tone 50%, Level Max, Asymmetrical Clipping
- Dirty 1 - Drive 50%, Tone 50%, Level Max, Asymmetrical Clipping
- Dirty 2 - Drive 50%, Tone 50%, Level Max, Symmetrical Clipping
- Grit 1 - Drive 25%, Tone 50%, Level 75%, Asymmetrical Clipping
* All Files recorded using a Fender MIA Strat into an Ampeg GU-12 Tube Amplifier (with the exception of the Ferrara sample)
Product Features:
- True Bypass Switching.
- 2.1mm adapter jack (9V DC wired pin negative) with battery clip.
- 5mm Bright Green LED Indication.
- 1% Metal Film Resistors.
- Polyester Film Capacitors throughout for better audio performance with the least noise.
- 1uF Coupling Capacitors are Non-Polarized Metal Film.
- Socketed JRC4558D IC.
- Symmetrical/Asymmetical Clipping Mode Toggle Switch.
- PCB securely mounted using PEM standoffs.
- Two Year Warranty Against Defects or Failure.
Mods:
The frequency response of the 808+ can easily be tweaked, the stock TS808 cuts bass and treble achieving that mid range response that made the pedal famous. However, this pedal can be "opened up" by adjusting the filters and allowing more treble or bass to the output (or both). I can tailor the response of your 808+ to meet your specific needs based on your rig...just ask!
Product Information:
- Click here To download the GoudieFX 808+ information page in msword format.
![[Product Image]](http://www.goudiefx.com/images/products/808p/808Inside_t.jpg)